Top Posts
You are here: Home » Tag Archives: Railways

Tag Archives: Railways

Feed Subscription


Steel Sleepers

Sleepers Sleeper is transverse support for a railway to give stiffness to it. Functions of Sleepers Holds the rails to correct gauge. Give a firm and even support to the rails. Distributes the axle load over a sufficiently large area of ballast. To act as elastic medium between the rails and ballast to absorb vibration. To maintain the alignment of ... Read More »



Ballast Ballast is a layer of broken stone, gravel, or any other suitable material placed under and around the sleepers for distributing the load from the sleepers to the formation. Functions of Ballast It provides a suitable foundation for the sleepers. It transfer and distributes loads from the sleepers to a larger area of formation. it provides effective drainage to ... Read More »

Types of Railway

Super Express

Functional Types of Railway Super Express Rapid Trains Local Trains Subways 1. Super Express (Bullet Train) Normally intercity trains. Top Commercial Speed Country dependent Maximum 581km/h (Japan) Still under Experiments. France and European countries 330 km/h on an average. 2. Rapid Trains (Limited Express Train) Intercity Trains, Urban-rural Connection Top commercial Speed 120-150 km/h Stops at Limited Stations. 3. Local ... Read More »

Creep of Rails

Creep of Rails It is a horizontal movement of rails in a track. It can be minimized but cannot be stopped. Causes Of Creep| There are three main causes of Creep Wave motion of trains. Expansion and contraction of rails due to variation in temperature. Due to starting, accelerating, slowing down (decelerating) and stopping of trains. Wave Motion When train ... Read More »

Types Of Crossing

Types Of Crossing Square Crossing Diamond Crossing Cross Over Scissor Crossing Symmetrical Split SQUARE CROSSING When to railway lines cross each other at 90o it is called Square Crossing. DIAMOND CROSSING Angle of intersection (Crossing angle) of two tracks is when not 900 , then it is called diamond crossing, CROSS OVER A cross over is introduced to transfer a ... Read More »


Wear at Curves

WEAR OF RAILS TYPES Wear on Head of Rail Wear on Ends of Rail Wear of Rail on Curve WEAR ON HEAD OF RAIL Wear on head of rail is due to abrasion on moving rails. Due to grinding action of sand or dust between the rails and wheels of the train. When train starts or applies brakes, the wheel ... Read More »


Double Headed Rail

RAILS Rail is an iron beam. Its main function is to provide a most economical, smooth and level surface for the smooth passage of heavily loaded vehicles at great speed. The two RAILS of the track also serve as a lateral guide for the running of the wheels. Types of Rails Rails can be classified into the following categories: Double ... Read More »



FASTENING The devices used to connect rails and sleepers together to form the track are known as FASTENINGs.  Following devices are used as fastenings to keep the rails in their correct position Fish plates Bolts. Chairs Keys. Bearing plates. 1.  FISH PLATES The function of a fish plate is to hold two rails together both in horizontal as well as in ... Read More »

Scroll To Top